Vax Rapide Classic Carpet CleanerV-024
How do I clean the dirty water tank and filter?
Cleaning the dirty water tank and filter
Pull the dirty water tank handle forward
Lift to remove
Lift to remove the dirty water tank lid
Pull to remove the filter from the lid
Rinse the filter under the tap to remove any dirt or debris
Allow 24 hours to air dry
Rinse the tank through with warm water and tip out
How do I access the brushbar?
Accessing the belt and brushbar
Switch the machine off and unplug from the wall socket
Remove the tanks and lie the machine back
Remove the 2 screws underneath
Lift the belt cover off
If damaged, remove the belt
Replace with new belt
There is a high pitched noise coming from the machine
The machine has a float in the dirty water tank that is designed to rise with the level of the water. However, if the machine is jolted, or there is a large amount of foam in the tank, the float may rise to the top. The rising float will block the suction and the machine will make a high pitched noise.
To return the float to its original position, simply switch the machine off, allow it to drop down and then retry the machine