Sign up to our newsletter
We'll send you ideas, inspiration & special offers.SpotWash
Register Your Product
You can register your Vax product on the Vax website registrations page.
Register your productHow to videos and documents
Useful video and PDF guides, showing you how to use, maintain and fix your Vax product.
Maintenance
Here is what you can do to keep your appliance performing at its best.
Cleaning the filter
Press the dirty water tank release button. Pull and lift to remove the tank.
Remove any dirt and debris from the filter grill located underneath the dirty water tank.
Using the hose self clean function
Press the clean water/solution tank release button. Lift and pull to remove the tank.
Unscrew the cap and fill the clean water/solution tank with approximately 1 inch of warm water(max 40°C).
Screw the cap back on and refit the clean water/solution tank onto the machine so it clicks into place.
Press the wash tool release button and pull to remove the tool from the hose end.
Push the hose end into the hose self clean port.
Switch the machine on and hold in place until the clean water tank has emptied. Do not squeeze the trigger. Repeat as necessary.
Emptying and cleaning the dirty water tank
Press the dirty water tank release button. Pull and lift to remove the tank.
Lift the dirty water tank clip and unhook to release the lid.
Lift the lid to remove from the dirty water tank.
Empty the dirty water into the sink or toilet.
Rinse the dirty water tank and lid with warm water (max 40°C) to remove dirt/debris.
Troubleshooting
Here is what you can do to keep your appliance performing at its best.