Power 2 Series

Maintenance

Here is what you can do to keep your appliance performing at its best.

Removing a blockage from the hose
Remove hose

Twist to remove the hose where it joins the machine

Remove blockage

Remove the hose from the opposite side and push a broom handle through to clear any blockage

Cleaning the filters
Remove dirt container

Remove the dirt container

Clear dust from dirt container

Turn the lid anti-clockwise to remove and tip the dust/debris out into a bin

Twist filter to remove

Turn the filter anti-clockwise to remove from the lid and tap against the side of a bin

Remove filter and clear dust

Remove the pre-motor filter from underneath the dirt container and shake to remove any dust

Accessing the belt and brushbar
Switch machine off

Switch the machine off and unplug from the wall socket

Remove 5 screws

Remove the 5 screws underneath the machine

Remove the last screw

Pull down the small wheel carriage and remove the sixth screw located inside the tube

Remove brushbar cover

Turn the machine over, remove the height adjuster dial and lift off the cover

Troubleshooting

Here is what you can do to keep your appliance performing at its best.

            Email us